Topklasse Discussion Board  
Home Forum Legal/Privacy Media/Picture Gallery Websites and Links Technical

Go Back   Topklasse Discussion Board > THE EXPERIENCE - DRIVING PLEASURE > ARTICLES

ARTICLES Articles related to our beloved cars

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 27th June 2020, 10:10 AM
sean sherry sean sherry is offline
Aristocrat
 
Join Date: Jan 2012
Location: sydney
Posts: 1,595
Thumbs up Direct injection

Two steps forward and one step back... Ie the inlet valves carbon up...
The Subaru inlet manifold Cleaner works well.for me....
I now read that the main culprit is the Crank Case ventilation system producing too much oil vapour.
Apparently the thin Oils now used.... 0/20 ..5/20 etc are more volatile. more prone at producing harmful oil vapours....
Better to use a higher grade say 10/20...30 which is less volatile and less prone to producing the harmful vapour. In our temperate Climate the higher viscosity numbers would not make much difference.... just keep clean, quality oil, and Filters ...
Reply With Quote
  #2  
Old 27th June 2020, 11:27 AM
sean sherry sean sherry is offline
Aristocrat
 
Join Date: Jan 2012
Location: sydney
Posts: 1,595
Cool Re: Direct injection

P.S. these very low viscosity Oils are for Europe to reduce Fuel consumption and hence emissions. I recall a Ford Factory Training School I attended for the "Tank Model" in 1959 , where the Instructor said, that as far as Ford was concerned .. there was no Winter in Australia... There was Winter in Canada where the Car was sourced ... minus 20 and under. Zero viscosity Oils perhaps
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
D-Jet Injection system. Tony66_au TECHNICAL INFORMATION 17 18th October 2014 05:37 AM
6 cyl. (Pagoda) Injection Pump Styria ARTICLES 0 21st April 2012 03:56 AM
K-JET Injection system Styria TECHNICAL INFORMATION 12 9th April 2012 08:59 AM
Servicing 6.3 Injection Pump Styria MECHANICALS 2 14th May 2011 06:48 AM
Injection pump replacement. abl567 TALKING TORQUE 7 29th September 2008 09:32 AM


All times are GMT +10. The time now is 07:58 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright Topklasse 2020