Topklasse Discussion Board  
Home Forum Legal/Privacy Media/Picture Gallery Websites and Links Technical

Go Back   Topklasse Discussion Board > THE EXPERIENCE - DRIVING PLEASURE > ARTICLES

ARTICLES Articles related to our beloved cars

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10th January 2020, 05:03 PM
Jimb Jimb is offline
Distinguished
 
Join Date: May 2019
Location: Kanahooka
Posts: 125
Default Wheel required

Hi from Jimb.
I have just fitted 4 new tyres to my Mercedes the Mags on the car are 15 inch and I have fitted 205/65/R15 tyres. However the spare is a 14 inch steel wheel. Does anyone have a 15 inch rim I can buy? I don't mind if it Is a steel rim however I would prefer a MAG. I do have another set of the wheel nuts for the steel rim. I would not be keen on fitting this 14 inch wheel on the back. I don't think it would do the diff much good. Am I worrying to much?
The car is now pretty well sorted even have nice cold air-conditioning. I love driving this car. (280SE) 1974.
Kind Regards Jimb.
Reply With Quote
  #2  
Old 10th January 2020, 05:10 PM
abl567's Avatar
abl567 abl567 is offline
Super Moderator
 
Join Date: Mar 2008
Location: Sydney
Posts: 2,036
Default Re: Wheel required

I have a set of 4 15" steels and hubcaps (rare) I may be prepared to part with, the wheels are a W124 part number and I don't recall the ET or width off hand so that would need to be checked for 116 suitability. I'd only sell as a set.
__________________
W109 300SEL
#2723 6.3
W202 C240
W220 S500
Reply With Quote
  #3  
Old 11th January 2020, 09:47 AM
Jimb Jimb is offline
Distinguished
 
Join Date: May 2019
Location: Kanahooka
Posts: 125
Default Re: Wheel required

Thanks for the offer ab1567.
I want to keep the Mags so I won't take up your offer.
Regards Jimb.
Reply With Quote
  #4  
Old 11th January 2020, 10:30 AM
Styria's Avatar
Styria Styria is offline
The Godfather
 
Join Date: Feb 2008
Location: Sydney
Posts: 8,621
Default Re: Wheel required

Hi Jim, you say that you have 15" alloy wheels already. Are they after market items, or are they the genuine 15" Bundt rims ? If they are, it will be difficult to find a single, or for that matter, a complete set of those Bundts. They are very expensive, even in used condition.

Nice to know that you are so happy with your car. It is great news. Regards Styria
Reply With Quote
  #5  
Old 11th January 2020, 12:11 PM
Oversize's Avatar
Oversize Oversize is offline
Aristocrat
 
Join Date: Apr 2010
Location: Melbourne
Posts: 4,890
Default Re: Wheel required

Wheel diameter means nothing unless you have brake or suspension clearance issues. Different tyre sidewall heights can destabilise a car but itís not an issue if itís a spare.

Tyre rolling diameter is the real issue with your diff. Easy to check on the Bob Jane website.
__________________
Mark

01 Ford AU 5L (Deep Blue)
88 420L Euro#-P
88 420L#-P
88 420L#2477-P
87 560L#2020 (Dora 2)
87 560L #9987
87 420L#4309-P
87 420L#-P
86 560L#5896-P
79 6.9#5541 (Red Bull)
78 6.9#4248 (Skye)
79 6.9#3686 (Moby Dick)
78 6.9#1776 (Dora 1)
77 450L#7010-P
75 450L#8414 (Gold Nugget)-P
57 Buick 73A (Titanic)
Reply With Quote
  #6  
Old 11th January 2020, 01:40 PM
Jimb Jimb is offline
Distinguished
 
Join Date: May 2019
Location: Kanahooka
Posts: 125
Default Re: Wheel required

Thank you Styria and oversize. They are the genuine Mercedes rims.
I think I will just stick with the 14 inch spare.
Punctures are fairly rare these days. Hopefully with the new tyres I won't need it.
Took it for a run today, had lunch at Berry it is only 45kms down the road and always a pleasant run.
Regards Jim.
Reply With Quote
  #7  
Old 11th January 2020, 09:59 PM
SEL_69L's Avatar
SEL_69L SEL_69L is offline
Aristocrat
 
Join Date: Feb 2009
Location: Sydney, NSW, Australia
Posts: 1,314
Default Re: Wheel required

Whatever the case, just make sure that the wheels fitted have the correct offset measurement for the suspension.
With zero offset steering, as with most modern cars, it is essential that kingpin axis passes through the exact centre of the tire contact patch on the road.

If that doesn't happen, the car won't handle as designed, and the suspension bushes are under greater stress in cornering.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil required for 6.9 suspension Michel MECHANICALS 88 22nd December 2012 07:05 PM
Help required - engine cutting out 450SE MECHANICALS 15 25th November 2009 10:16 AM
116 Leather Seats required John S MERCEDES W116 4 25th February 2009 08:16 PM
Caption Required Des TALKING TORQUE 11 5th October 2008 09:26 AM


All times are GMT +10. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright Topklasse 2020